Top 10 Reasons for Failing the Driving Test

  • Home
  • Blogs
  • Top 10 Reasons for Failing the Driving Test
Top 10 Reasons for Failing the Driving Test

What are the top 10 reasons for failing the driving test?

The most common reasons include ineffective observations at junctions, missing mirror checks before changing direction and problems turning right. DVSA’s latest annual top-ten list covers car driving tests in Great Britain from April 2025 to March 2026. The order below follows that published data, rather than an estimate of what happens at a particular test centre.

Use this guide to identify skills to practise with your instructor. Learning the list alone will not make you test-ready: the aim is to drive safely and independently in different situations, including roads you have not seen before.

Data checked: 3 November 2026. Source: DVSA car driving test statistics, table DRT121F, updated on 25 June 2026 with data to March 2026.

1. Junction observations

Effective observation means understanding what is approaching and deciding whether it is safe to proceed. A quick glance is not enough if buildings, parked vehicles or a bend restrict the view. Look for cyclists and motorcyclists as well as larger vehicles, and keep checking as the situation changes.

Practise: Approach at a speed that gives you time to assess the junction. With your instructor, compare open and restricted junctions and explain what makes a gap suitable. Avoid committing simply because another driver appears to be signalling.

2. Mirrors before changing direction

A mirror check should inform your decision before you change course. Turning, changing lanes or moving around parked vehicles can affect somebody beside or behind you. Looking after you have started moving does not give you the same opportunity to respond.

Practise: Build checks into your normal planning rather than making exaggerated movements for the examiner. Say what you have noticed during lessons, then decide whether to wait, adjust your speed or continue. Keep observations relevant to the manoeuvre and the traffic around you.

3. Turning right at junctions

Right turns bring together observation, positioning, timing and control. Rushing the approach can leave too little time to judge approaching traffic or choose the correct position. Cutting across the corner can also bring the vehicle into the wrong part of the road.

Practise: Prepare early, follow the road layout and markings, and judge a safe opportunity without pressure from vehicles behind. After turning, establish a safe position on the new road. Ask your instructor to practise a range of junction layouts rather than one familiar example.

4. Responding to traffic lights

Watch the lights that apply to your lane and plan your approach so you can respond smoothly. Do not assume the car ahead moving means your signal permits you to go. Look beyond the lights as well: a green signal does not remove the need to check that the way is clear.

Practise: Notice signals early and avoid accelerating to beat a change. Discuss safe decisions when a light changes on approach, including the meaning of amber, and recognise separate signals for different lanes or movements.

5. Steering control

Steering faults can arise when a driver loses their intended course, turns too sharply or drifts while concentrating on another task. Looking only at the kerb or bonnet can make it harder to plan a smooth path through a bend or junction.

Practise: Look ahead along the path you intend to follow and adjust your speed before steering becomes rushed. Work on bends, junctions and narrow roads with your instructor. Aim for accurate, controlled movement rather than a particular hand position performed for appearance.

6. Moving off safely

Before moving away, you need to know whether doing so would affect another road user. Mirrors alone may not reveal someone in a blind spot. A safe check can also become out of date if you wait before actually moving.

Practise: Prepare the car, check effectively around it and move only when it is safe. If the situation changes or you pause, look again. Include moving away from behind parked vehicles and on different gradients, with your instructor choosing suitable practice locations.

7. Responding to road markings

Road markings provide instructions and help you choose a suitable position. Late recognition of lane arrows, stop lines or give-way markings can lead to rushed corrections. Familiarity with a road is not a substitute for reading what is in front of you.

Practise: Look well ahead and connect markings with signs and traffic conditions. If you find yourself in the wrong lane, avoid a sudden unsafe move. Take a safe, lawful route and allow the examiner to redirect you if necessary.

8. Responding to traffic signs

Signs need to be noticed, understood and acted on in time. Concentrating entirely on the vehicle ahead can make it easier to miss a restriction or change in speed limit. Temporary signs deserve the same attention as permanent ones.

Practise: Refresh your sign knowledge between lessons and identify signs early during supervised practice. Explain the action each sign requires. Use the official Highway Code and road-safety resources when revising unfamiliar signs.

9. Normal driving position

Your position should suit the road layout, lane markings and hazards. Driving too close to parked vehicles can leave little room for opening doors, while unnecessary drifting can affect other traffic. Positioning needs continuing attention, not just a check when entering a road.

Practise: Assess the space available and adjust your position and speed together. Work on passing parked cars, lane discipline and bends. Where the available gap is unsuitable, waiting is better than trying to squeeze through.

10. Maintaining progress at an appropriate speed

This category concerns making suitable progress, rather than the separate issue of speeding. Unnecessarily slow driving can show that a learner is not responding appropriately when conditions allow them to proceed. However, a speed limit is not a target to maintain regardless of visibility, weather or hazards.

Practise: Discuss why a speed is appropriate for each situation. Build confidence progressively so you can adapt without being hurried by other drivers. Ask your instructor to identify when caution is necessary and when you could safely make better progress.

Turn the list into a useful lesson plan

Choose two or three areas from your recent lessons or test feedback and agree specific practice goals. Review what improved afterwards and where you still needed help. A mock test can reveal how consistently you apply your skills when instructions are less frequent.

Nationwide Driving School provides manual and automatic lessons in Burton upon Trent, Derby and surrounding areas. If you would like help with test preparation, send us your postcode, driving experience and preferred lesson times so we can check suitable instructor availability.

Learn more driving tips by following us on Facebook and Instagram.

Leave A Comment

Your email address will not be published. Required fields are marked *